The Datron D5 Dental Mill
Inside Dental Technology delivers updates on digital workflows, materials, lab techniques, and innovation in dental technology through expert articles and videos.
October 1, 2014
Volume 5, Issue 10, October 2014
Page(s): p. 84-85
Before development of the D5 Dental Mill started in Germany, DATRON carefully examined the landscape of dental CAD/CAM technology and identified which voids needed to be filled. The market was already saturated with easy-to-use bench-top units that successfully milled crown-and-bridge restorations in zirconia, wax, and PMMA. Additionally, there were a handful of advanced dental mills touting more robust features, such as automation, additional tool holders, and the ability to mill harder materials like titanium or chrome cobalt. However, these machines still lacked the accuracy and rigidity to manufacture titanium implant bars and custom abutments that meet the extremely high standards set by implant manufacturers.
To do this, DATRON realized it would have to develop a machine from the ground up specifically for dental milling applications, or in this case, from the “puck out." Envisioning a standard disc of 98.5-mm grade-5 titanium as the very heart of the machine, DATRON engineers based every aspect of their design on efficiently and accurately holding, moving, and milling that piece of material.
DATRON D5 features that ensure implant milling success:
Industrial rotary axis: The rotational movements of the fourth and fifth axes converge in the middle of the blank and are each supported at both ends. This minimizes positional error and increases the structure’s rigidity.
Minimum-quantity coolant system: The minimum-quantity coolant system is not only easier to service and maintain than traditional flood coolant, but it also offers extended tool life for milling with small-diameter tools at high spindle speeds.
High-speed spindle with HSK tool holders: The water-cooled 1.8-kW spindle is the only one in the dental industry that features HSK tool holders to reduce runout (vibrations) at the tip of the tool, increasing accuracy of the final milled part and greatly contributing to significantly longer tool life—as much as 10 times better than traditional dental milling machines.
Linear scales for ± 5-μm accuracy and 2-μm repeatability: Optional linear scales on the D5 LS compensate for thermal changes on the fly throughout the milling process and increase the machine’s accuracy to an industry-leading 5 microns across the entire work area.
For more information, contact:
DATRON Dynamics, Inc.
P 888-262-2833
W datron.com
Disclaimer: The preceding material was provided by the manufacturer. The statements and opinions contained therein are solely those of the manufacturer and not of the editors, publisher, or the Editorial Board of Inside Dental Technology.
